you are here: Home / News / Industry News / Universal casters overhaul method

Universal casters overhaul method


1, to detect the degree of visual wear of the tread. Ti […]

1, to detect the degree of visual wear of the tread. Tire surface "grinding point" may imply that the accumulation of foreign matter, such as wire rods and other debris may be wound around the wheels, remove the wheels of the bolts and nuts, clean debris. Check the wheel bearings are damaged, if the parts are not damaged can be re-assembled to continue to use, if the wheels are often encountered by the phenomenon of miscellaneous material is recommended to install anti-wrapped cover to avoid.
2, the caster or wheel stuck can also cause "grinding point." Appropriate maintenance checks, in particular, check the tightening of the bolt, how much oil, replace the damaged wheels can enhance the rolling performance of equipment and rotation flexibility.
3, rubber tires serious damage or become loose may lead to rolling instability, leakage, load abnormalities, and floor damage, etc., timely replacement of damaged tires and bearings can be reduced due to damage caused by wheel damage caused by the cost of downtime.
4, check the repair of the wheel, to determine whether the bolt nut tightened, as much as possible in all the bolts on the use of lock washers or loose nuts. If the bolt is loose, tighten it immediately. If the wheels loosely mounted inside the bracket will cause the wheels to be damaged or not to rotate.

Copyright © 2016 Jiaxing Jinwang Plastic Products Co., Ltd. All Rights Reserved Desidn by HWAQ